If you are a wine lover, a wine cooler is a must. It is an indispensable cooking tool that helps to keep the wine at the right temperature and preserve its flavor. Wine coolers can be installed in two ways: independently and built-in. Built-in wine coolers are installed under the countertop and are an excellent choice if you have limited space. Contrary to popular belief, installing an integrated wine cooler is not a difficult task and does not require great carpentry skills. With the right tools and equipment, you can professionally install your integrated wine cooler. Here are a few simple steps to install an integrated wine cooler.

Step 1: Checking technical data

Before you buy a wine cooler, make sure it is suitable for installation in a cabinet or in a confined space. The integrated wine coolers can be installed inside the cabinet because they have front ventilation. In addition, the side ventilation should not be blocked to prevent overheating.

The front vent provides the necessary ventilation for efficient operation. The ventilation opening of the integrated wine coolers is located at the back, so you should leave enough space between the wall and the ventilation opening. When looking for a place, make sure there is enough space and that nothing is blocking the ventilation. Ventilation helps you determine how much space you need and where to place your wine cooler.

Step 2: Check power supply

Before you install your wine cooler, check your power source to determine where you will plug it in. Many wine coolers come with a 1.8 metre power cable. The built-in refrigerator must be equipped with an electrical outlet, as most manufacturers do not recommend the use of extension cords or cables. Some appliance manufacturers may exclude you from the warranty if you use extension cords for your wine coolers. Most home appliances require 110V power, while large cooling appliances may require 220V power. If you don’t have one, hire an electrician to install one.

For safety, use a protective grounding device and route the cable so that it cannot be tripped over.

Step 3: Placeholder

The location you choose for your wine cooler is of utmost importance to ensure its efficient and effective operation. Consider the situation in which the chiller will be placed, taking into account factors such as light, temperature and airflow. Wine coolers, for example, can be placed anywhere in the house. For example under an existing cabinet, bar or worktop. Other people prefer to place their wine coolers under the stairs, especially if space is limited.

It is advisable to protect the wine from direct sunlight, as this can affect the quality and taste of the wine. Although there are wine coolers whose glass protects against UV rays, it is important to keep them away from places where the sun is present. Plus, direct sunlight makes your fridge work harder to keep the bottle in the fridge. This makes the refrigerator inefficient over time.

You should also put your integrated wine cooler in a place where there is enough room for ventilation. You need to provide an area where the refrigerator gets enough air from the back, sides and top. It is recommended to leave 2 inches on the back, 1 inch on each side and 4 inches on the top.

Step 4: Making measurements

Another preliminary consideration is the size of the room you want to put your refrigerator in. Use a tape measure to measure the space and make sure there is room for ventilation and that the doors are fully open. Although this is often assumed, it is essential in terms of usability. You can no longer use the refreshment and reach certain areas if you cannot fully open the door.

Measurement should also take into account the dimensions of the installation, i.e. the height of the wine cooler, the depth of the door and the depth of the handle. Remember to leave enough room to open the door fully. In addition, the clearances in the power supply must be checked.

Step 5: Collection of consumables

When preparing to install your wine cooler, make sure you have all the necessary materials and tools on hand. With the right tools and techniques, the installation process will be smooth and effortless. You will need the following tools and materials:

  • Instructions for your wine cooler
  • Tape measure
  • Viewed on
  • Level
  • Phillips screws
  • Spacers such as. B. Scrap wood to be laid on an uneven floor.

Step 6: Preparing the cabinet compartment

Prepare the room where you will place your integrated wine cooler. Remove the cabinet door and cut out the cabinet using the manufacturer’s recommended cutting dimensions. Once you have taken your measurements, remember to mark them before cutting. Place the refrigerator in the room to see if it fits and make any necessary adjustments.

In addition to measuring the space, it is also important to prepare the floor area. The suitable floor for the installation of the cooler is a hard floor covering. However, if the floor is carpeted, it is advisable to use a bathtub made of plastic or heavy metal. Carpet can trap the heat created by condensation, which can lead to mold growth under the cooler. You can also use cling film under the fridge.

Step 8: Do not connect immediately.

Once the wine cooler is level, wait at least 2 hours before connecting it to the mains. This helps coolant and gases settle, especially after transportation. Otherwise, immediate connection to a power source may cause operation problems for more relaxed people.

Step 9: Wine cooler connection

Plug in the wine cooler and select the ideal temperature as you let it cool. Fill it with your favorite wine or liquor bottles and enjoy.


As you can see above, installing an integrated wine cooler is a do-it-yourself project that you can do without the help of an electrician. All you have to do is analyze the space and location and make sure you have everything you need to get the job done. You may also need to determine the size, features and design of your wine cooler so that you can easily install your new integrated wine cooler.

install a beverage cooler in an existing cabinetinstalling under counter fridgecan i put a wine cooler in a cabinetinstalling mini fridge under-counterhow to install a beverage coolerwine cooler in kitchen cabinetwine cooler installation costfront venting wine cooler

You May Also Like

Women of the Vine & Spirits Launches a New DE&I Leadership Series Engaging Senior Male Executives in Wine, Beer and Spirits

Women of the Vine & Spirits (WOVS) , a national non-profit whose…

Appellation St. Helena Announces New Board

View Planning for the pandemic year Katie Simpson St. Helena, Napa Valley,…

Crush2Cellar Founder Terry Sherwood Celebrates 25 Years Working with Oregon Wineries

View Newberg, Oregon – 13. April 20, 2021 – Crush2Cellar, the Willamette…

Santa Julia Unveils Revamped Organic Canned Wine in 250ml (2-packs)

Organic Rose, Organic Chardonnay and Tintillo Red Wine Blend Niles, IL –…